Pay attention to the maintenance of the mixer pump after purchase, which will directly affect the service life of the mixer pump. How to properly maintain the mixer truck? First of all, it needs to be clear that there are many types of maintenance for the mixer truck, including daily maintenance, regular maintenance and annual maintenance.

1. Daily basic maintenance:

1. After pumping for about 5 minutes before starting work every day, check the lubrication of the four lubrication points of the hopper and the cleaning room to see if the lubrication is normal.

2. After the completion of each day, the remaining cement in the hopper and the car should be cleaned up in time (cement cannot be left in the dead corner of the hopper). Avoid unnecessary hassles for future cleaning jobs.

3. After finishing every day, clean the water in the cleaning chamber, exit the piston to check the piston, and then tighten the water-draining rubber plug to add new water.

Second, the monthly basic maintenance:

1. Check the cutting ring and glasses plate monthly for wear or excessive clearance. If there is wear, please turn the cutting ring 90 in time, so that the service life of the cutting ring will be doubled. The observation hole of the stirring motor base must also be checked every month to check whether there is any leakage of slurry.

2. The whole vehicle should be smeared with butter once a month, and the amount of butter can only be stopped after the clean oil has squeezed out the dirty oil.

3. Check the condition of the boom, outrigger limit pin, boom, outrigger, turntable, main beam and other structural components every month. Look for cracks or other phenomena.

3. Annual basic maintenance:

1. Hydraulic oil, transfer case and reducer oil should be replaced once a year.

2. Check and test the vehicle performance once a year. In addition, the maintenance of the chassis is also very important. Please maintain the chassis in time.

In addition to the above maintenance information, please pay attention to other matters:

First of all, the mixer truck must be supported on a solid ground, and cannot be supported on cavities (sewers, manhole covers, etc.). ).When supporting, make sure that the whole machine is in a horizontal state and cannot be tilted. Secondly, you need to support the legs before operating the boom, and you need to fold the boom before lowering the legs. When the boom is deployed, no one can stand under the boom. Avoid safety incidents. Finally, the mixer truck can only be driven on the road after the outriggers and the boom are fully closed and the four outriggers are completely locked to avoid safety accidents.

• Precautions for operation of 63m concrete pump truck
• How to deal with wastewater from concrete batching plant