Boom pump truck has been widely used in many industries because of its good performance. There are many precautions we should pay attention to when using it. What are the precautions when using it?

1. The boom pump truck shall be as close to the construction working face as possible. The construction site should have convenient, safe and reliable power source, with small construction interference and safe environment.

2. Understand the construction working face and construction requirements, and the cement type, cement dosage, aggregate gradation, water cement ratio and slump in the pumped concrete shall meet the transportation requirements.

3. Know whether the concrete has additives. In particular, it is required that the larger aggregate shall not be greater than 1 / 3 of the conveying pipeline.

4. Check whether the boom pump truck is intact, whether various instruments are normal, and whether the operating switches, buttons and handles of each part are in the specified position.

5. Check the water volume of the water tank and observe whether there is oil stain and turbidity. If necessary, drain the turbid water and refill it with clean water.

6. Check whether the hydraulic oil, lubricating oil level, oil quality and oil quantity meet the requirements. If the power is a generator, check its fuel oil, lubricating oil and cooling water.

The above-mentioned precautions for the boom pump truck also hope that you can pay attention to the above-mentioned precautions. As long as you can use it according to the correct requirements and pay more attention, it will be good for the later use.

• Concrete batching plant manufacturer-truemax
• Causes of pipe blockage of boom pump truck